Prior to the house renos in recent years, we thoroughly enjoyed having a woodstove to take the chill off - especially during the shoulder seasons heading into Spring and Winter, when it would be the difference of avoiding firing up the furnace for a few extra weeks. With the new floorplan, there was simply no spot for it (we though of accomodating it in the basement renos, but that didn't really work, either - and would do nothing for keeping things toasty upstairs).
Plus, we had this great full-masonry don't-build-them-like-that-any-more fireplace that was front and centre in the house, that was never - and I mean
never - used. So, we decided to install a wood-burning insert in our fireplace.

Easier said then done:
First - even though the firebox was "square", the arched brick facia precluded fitting in a decently sized insert, as it pinched in too much at the top. The arch would have to go.
Second - building codes have changed since 1974, and making any changes to the fireplace would mean bringing it up to current spec. That meant 18" of non-combustible hearth from the front of the door opening of the wood-burning appliance. In short - we needed a new hearth.

We had a very capable mason come in to do the brick work, and they did a great job. Martin and his brother were the same crew that did the required masonry work during our renovations, and we were lucky to have them accept this small project. Despite running into some difficulties (crumbling old bricks), they delivered exactly what we needed - a squared opening, with a lintel, to the required measurements.


After evaluating inserts from Pacific Energy, Napoleon, Hearthstone, and others, we went with the
Jotul C-550 "Rockland" for a few reasons: it is one of the very few "flush" fit models (most protrude onto the hearth a substantial amount), aesthetics (it looks great, with the large arched door and cast surround), size (huge firebox, and overall size sits well in the brick fireplace), and quality.
We purchased the woodstove, and had it installed by a WETT-certified technician, through
Embers, out of Perth. They were great to deal with; accomodating of our schedule, and never steered us wrong. Much better service than anything we encountered locally.


Overall, we are pleased - it looks fantastic, and with dry wood, kicks off a lot of heat - enough to get the living area at up to ~23^C even on quite cold Winter days. It easily burns through the night, though we don't typically do that, because with the kids bedroom doors closed, no heat gets into their rooms.
With that project done, we finally topped off the fireplace with crown moulding leftover from the kitchen cabinets. That looks 1 million times better.
